|
|
ONE10
Business Class IP Router
Product architecture
- ADSL uplink:
- G.lite, G.DMT Annex A (ADSL over POTS)
- G.DMT Annex B (ADSL over ISDN, U-R2 compatible)
- RJ-11 Connector
- Synchronization and activity LEDs
- Ethernet Switch:
- Automatic MDI/MDI-X crossover
- 10/100 Mbps, half/full duplex with autosensing
- Link status and activity LEDs
- VLAN support
- Console Port
- RS-232
- DB-9 female connector
IP Addressing and Routing
- Network address translation: static/dynamic NAT NAPT, selective NAT, twice NAT
- DHCP client, server, relay
- IP address helpers
- DNS proxy
- Routing protocol: RIP v1/v2, OSPF, BGP
- Policy-Based Routing
- VRRP
- Server load balancing
- Tunnel: IP Sec, GRE, IPIP, mobile IP
IP Quality of Service
- Class-Based Queuing (CBQ), CB-WFQ on LAN/WAN interfaces
- Low Latency Queuing
- Policing and remarking
- RED, WRED, ECN
ATM
- Up to 8 PVC
- OAM-F5 (send/receive): loopback, continuity check (segment and end to end)
- Shaping: UBR, VBR-NRT, VBR-RT, CBR
- Encapsulation (LLC or Mux): IPoE (bridge), PPPoA, PPPoE
Security
- Firewall
- Standard and extended access lists
- Stateful packet inspection
- Session monitoring and limiting
- Configurable timers per port and application
- All firewall log messages can be buffered, viewed or sent to a syslog server
- IP Security
- Optional hardware-based encryption (DES, 3DES) (*)
- Software encryption: DES, 3DES, AES
- Tunnel mode with AH and ESP
- UDP-based encapsulation for NAT traversal
- IKE with pre-shared secret, symmetrical or client-server mode
- Perfect Forward Secrecy
- DNS server update protocol: DynDNS and GnuDIP
Management
- Industry standard Command Line Interface (CLI)
- Web-based configuration wizard
- SNMP V1/2C/3
- Configuration of user privileges
- Upload/download of configuration/binaries via FTP/TFTP
- QoS measurement probe
- Traceroute, ping, extended ping
- User authentication via RADIUS or TACACS+
- Global statistics screens (console, web-based)
- Event and trace buffering
- Syslog client
- Flow capture and decoding
Technology
- WxHxD: 21,4 x 2,5 x 12,6 cm
- Weight: 0,7 kg
- Internal Power supply: 100 to 240V AC
Standards
- Compliant with CE Mark regarding safety, electromagnetic compatibility, immunity and interfaces.
- US: FCC part 15 class B
PPP
- PPPoA, PPPoEoA
- MLPPP fragmentation and interleaving
|